20L Sunflower Oil/ Water PET Bottle Blowing Machine Edible Oil
Before starting to manufacture the machine it is neccessory for us
to get the bottles samples according to which we can design the
preform and bottles mold. The shape of the PET bottles can be
various according to client. We can help to sculpt the bottles and
confirm with client before making bottle moulds.
MACHINE FEATURE ------BOTTLE MOLDING MACHINE
HQ series is a two step fully automatic blow moulding machine specially
designed for 20 liter edible oil bottle production, best choice for
productions with big volume, high speed and full automation. It has
1/2 cavities with up to 20 liters for each cavity, suitable as
welll for other bottles, like carbonated drinks, low-middle
tempeprature juice beverage,mineral water and pestcide,etc.
1. Easy to operate by using full autoamtic human-machine interface. PET bottle
blowing machine runs smoothly at very high speed.
2. Every parts of whole machine is selected properly and treated
3. PET bottle blowing machine adopts advanced intermittent preform
4. Conveying preforms automatically with conveyor.
5. Strong penetrability and good and swift distribution of the heat by letting the bottles
rotate by itself and revolute in the rails simultaneously in the
6. High adjustability to enable the preheater to preheat preforms in shapes by adjusting
the light tube and the length of the reflecting board in the
preheating area, and eternal temperature in the preheater with an
automatic thermostatic apparatus.
7. Action and blowing gas path design divided into three parts, in
order to meet the needs of bottle blowing, action of different
8. No contamination and low noise.
MAIN TECHNICAL PARAMATER
Bottle Blowing Machine
|Bottle Size||Max.Container height||490mm|
|Max. container diameter||290mm|
|Bottle Mouth diameter||90mm|
|Dimension and weight||Main body dimension||3500*2000*2100mm|
|Main body Weight||2600kg|
Air Compressor System
- Operating Pressure : 7-8 kg./cm2
- High Pressure Consuming : 2000-2500 Ltr/min
- Low Pressure Consuming : 1600 Ltr/min
- Blowing Pressure : 25-35 kg/cm2
- Operating Pressure :5-6 kg./cm2
- Temperature : 10 ℃
- Consuming : 5600 kcal/hr
- Flow Rater: 30 Ltr/min
With these security measures are intended to prevent injury to the
operator and other staff when a fault suddenly appeared, to avoid
damage the machine. Because various devices of this machine is the
use of pneumatic and electrical control, power and fast pace of
work, so any errors are operating on the dangerous consequences. In
order to protect the operator, the company is equipped with a
number of safety devices on the machine, before using the machine
must confirm that these devices work properly.
1). Installation, be sure to wear a helmet, cleats and uniforms
during inspection and maintenance of the machine.
2). Make sure the machine is installed in a dry, bright, clean
place. Workplaces around the machine must be solid, and its surface
3). Do not put the machine tools and other items on top or on any